#Gopro wifi mimolive install#
#Gopro wifi mimolive update#
#Gopro wifi mimolive mac#

Set up the DHCP config file '/etc/dhcp/nf'. Tell the DHCP server to service our wireless interface by editing '/etc/default/isc-dhcp-server': Find details on bridging networking interfaces on the web. This portion is optional if you decide to bridge your access point network with an already-established LAN. Start the server using: sudo service hostapd start Then set up the hostapd config file! It should look something like this: interface=wlan0

#Gopro wifi mimolive install#

Install the host AP deamon like so: sudo apt-get install hostapdĮdit '/etc/default/hostapd' to point to a hostapd config file by setting the DAEMON_CONF variable: DAEMON_CONF='/etc/hostapd/nf' We can do that like so: sudo ifconfig wlan0 down

#Gopro wifi mimolive mac#

On that is installed, we need to change its mac address to one from the GoPro's OUI (D8:96:85) so that the cameras will recognize it. I'm using a ALFA USB WiFi AWUS036NHA with the well-supported Atheros AR9271 chipset. You'll need a wifi adapter that can support master mode to set up an access point. I used and to help me develop some of these snippits. From there, we use DHCP to hand the camera an IP, and then it is on our network! The access point SSID also must be in a special form - 'HERO-RC-#' where the hashes are the last 6 characters of the AP's mac address.

In order to appear as a GoPro remote, the MAC address of the access point interface must use GoPro's OUI which is D8:96:85. To do this, we will set up an access point and DHCP server. This follow setup allows a Linux computer to appear as a GoPro remote to the GoPro cameras. Please view the source of the library for implementation details GoPro Remote Mode

#Gopro wifi mimolive update#

We'll update this review to reflect those changes when the app is released.The goprohero library currently implements the ad-hoc wifi mode. Eventually, GoPro says it will even release a GoPro App for Smartphones and Tablets that will allow your mobile device to do everything that that Wi-Fi remote can do and then some - including adding the option to preview and play back media saved on one or more GoPro cameras and to live-stream video to the Web using a smartphone's data connection. (Imagine stuffing one of these cameras in your car's wheel well to watch the suspension components work under load!) However, GoPro still has a few extra tricks up its sleeve for the Wi-Fi BacPac and remote.Īdditional Wi-Fi BacPacs can be purchased at $59.99 a pop, enabling a single Wi-Fi remote to control up to 50 GoPro cameras at a time (as long as they all remain in its approximately 600-foot maximum range). That's not a bad price to pay to boost the functionality of one of the best sports cameras on the market and it opens up a world of creatively mounting the rugged HD camera in previously inconvenient places. The Wi-Fi combo kit retails for $99.99 and includes everything that you need to fully convert one GoPro HD Hero or HD Hero2 camera for fully wireless operation. If we press the button again, GoPro will stop recording and turn off. Once we press the button, GoPro will turn on and start recording (flashing red on GoPro and flashing blue on the remote). Next, turn the remote on (solid blue on remote).

The Wi-Fi remote isn't much larger than a wristwatch and mirrors the shutter and select buttons of the GoPro camera. Demo: This video starts with turning GoPro WiFi on (flashing blue on GoPro). At this point, the GoPro user has three devices to remember to charge between sessions (the BacPac, the remote, and, of course, the camera itself), which verges on ridiculous, but I think the extra functionality is totally worth it. In its place, a proprietary charging cable can be attached and plugged into any powered USB port to recharge the remote's internal battery. That attachment ring can be removed with a flick of a release switch located on the unit's back and a tug. Users can also dangle the remote from a key-ring-like attachment ring located at one end of the device. A pair of slots on the back of the device accommodate an included wrist strap, making the device wearable. The Wi-Fi remote's sealed construction makes it waterproof down to 10 feet of submersion. So I was able to view the shooting mode, monitor the battery level of the camera, observe the amount of available storage space, and view the menus for changing the aforementioned options. Next to those rubber buttons is a monochrome LCD that is identical to the one on the front of the GoPro camera and mirrors the data displayed there.